TECNO-CX-Air-MT6737M Flash File Dead Boot Repair 100% Tested No Dead Risk

MT6737M__TECNO__TECNO_CX_Air__TECNO-CX-Air__7.0__CXAir-H3713B-N-170920V102

Created by Infinity-Box (c) Chinese Miracle II (c) 2016
Device Brand   : TECNO
Device Model   : TECNO-CX-Air
Device CPU     : MT6737M
Device IntName : H3713
Device Version : 7.0
Device Compile : 9/20/2017 4:05:09 PM
Device Project : CXAir-H3713B-N-170920V102
Device ExtInfo : TECNO CX Air

DEAD PHONE,HANG LOGO,LCD BLANK,CAMERA FIX,MONKEY VIRUS CLEAN DONE FLASH FILE

B-KASH-01871366812

Wait for phone...
Phone found! [ 9 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6735
BB_CPU_NME : [MediaTek] MT6735_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x93
NAND Flash : NOT INSTALLED
eMMC Flash : 510001154D3336459EF00342DB2185A8
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM36E
[eMMC] : FLASH_CID : 150100514536334D4203F09EA88584DB
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003A3E00000
[eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB]
DEV RID    : 0x2932D5D895085A652640A0CDB522E4F3
INT RAM    : 0x00020000
EXT RAM    : 0x80000000 [2 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ... 

xGPT : Normalize settings Ok!

Brand     : TECNO
ProdName  : H3713
ProdModel : TECNO CX Air
Device    : TECNO-CX-Air
AndroidVer: 7.0
MTKxCPU   : MT6737M
MTKxPRJ   : CXAir-H3713B-N-170920V102

[Read Ok] : preloader_rlk6737m_65_n.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : tz1.img
[Read Ok] : tz2.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6735M / V1.1.2 / rlk6737m_65_n / EMMC
Android Info saved
HWConfig Info saved
FW Size : 3343 MiB
Scatter saved to : L:\New folder (4)\MT6737M__TECNO__TECNO_CX_Air__TECNO-CX-Air__7.0__CXAir-H3713B-N-170920V102\

All done!

How To Flash

1.  Step Download And Extract The Stock Or Firmware On Your  Computer.
2.  Step After Extracting You Will Find The SP Flash Tool, Driver And Instruction Manual.
3.  Step Install the USB Drivers Skip If Drivers Are Already Installed.
4.  Step Open The SP Flash Tool And load The Scatter File From The Firmware Folder
5.  Step Connect Your Smartphone To The Computer Using The USB Driver.
6.  Step Click on Upgrade / Download Button In The SP Flash Tool To Begin The Flashing.
7.  Step Green Ring Will Appear At The End Of Successful Flash Done.

 Important Notes:

Take A Backup Of Your Personal Data Before Flashing Or Installing The Firmware On Your Smartphone. As This Helps You To Recovery The Personal Data Whenever Any Thing Wrong Happens.

Read more

Micromax Q327 pacAndroid 4.4.2 Firmware 100% Tested

sp7731gea_q327_5 1_mmx_q327_bd_sw_v07_hw_v1 0_16022016_micromax_q327

Created by Infinity-Box (c) Chinese Miracle II (c) 2017

Device Brand   : Micromax

Device Model   : Q327

Device CPU     : sp7731gea 

Device IntName : Q327

Device Version : 5.1

Device Compile : 2/18/2016 8:31:49 AM

Device Project : MMX_Q327_BD_SW_V07_HW_V1.0_16022016

Device ExtInfo : Micromax Q327

Phone found! [ 8 ]

Port Opened

Sync...

InitBoot Done [ 0x81 ] , Ver : SPRD3

Sync...

Sending FDL

[Info] : If SW freeze here more, than 15 seconds - remove cable

FDL Ready!

Boot Ver : SC773x Android 5.x eMMC v1.0 Inf 

Sending FLASH FDL

FLASH FDL Ready!

Boot Ok!

Model Name  : Q327

Model Brand : Micromax

Model Device: Q327

AndrVersion : 5.1

BaseBand CPU: SP7731GEA

Project Ver : MMX_Q327_BD_SW_V07_HW_V1.0_16022016

Model Ext   : Micromax Q327

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ... 

[Read Ok] : u-boot-spl-16k.bin

[Read Ok] : u-boot.bin

[Read Ok] : prodnv.img

[Read Ok] : sc7731g_CP0_modem.bin

[Read Ok] : DSP_DM_Gx.bin

[Read Ok] : nvitem_w.bin

[Read Ok] : sc8830g_modem_CP2_WCN_14D_W15.43.3_Release.bin

[Read Ok] : nvitem_wcn.bin

[Read Ok] : logo_480x800.bin

[Read Ok] : fblogo_480x800.bin

[Read Ok] : boot.img

[Read Ok] : system.img

[Build Ok] : cache.img

[Read Ok] : recovery.img

[Build Ok] : userdata.img

AndroidInfo created

Firmware Size : 1770 MiB

Saved to : L:\New folder (4)\New folder\MT6580__WALTON__Primo_G8__Primo_G8__7.0__alps-mp-n0.mp2-V1_vz6580.weg.i.n_P116\SP7731GEA_Q327_5.1_MMX_Q327_BD_SW_V07_HW_V1.0_16022016_Micromax_Q327\

Done!

B-KASH-01871366812

How To Flash

1.  Step Download And Extract The Stock Or Firmware On Your  Computer.
2.  Step After Extracting You Will Find The SP Flash Tool, Driver And Instruction Manual.
3.  Step Install the USB Drivers Skip If Drivers Are Already Installed.
4.  Step Open The SP Flash Tool And load The Scatter File From The Firmware Folder
5.  Step Connect Your Smartphone To The Computer Using The USB Driver.
6.  Step Click on Upgrade / Download Button In The SP Flash Tool To Begin The Flashing.
7.  Step Green Ring Will Appear At The End Of Successful Flash Done.

 Important Notes:

Take A Backup Of Your Personal Data Before Flashing Or Installing The Firmware On Your Smartphone. As This Helps You To Recovery The Personal Data Whenever Any Thing Wrong Happens.

Read more

hotwav venus 9 plus flash file dead boot repair 100% tested

DEAD PHONE,HANG LOGO,LCD BLANK,CAMERA FIX,MONKEY VIRUS CLEAN DONE FLASH FILE 

 C7367_TG_R12_Benga_324_QHD_NOGPS_B1_V01.01.B04

Phone found! [ 8 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v1.0     
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : sp7731c_c7367_qhd_oversea
Model Brand : TG
Model Device: sp7731c_c7367_qhd
AndrVersion : 6.0
BaseBand CPU: SP7731CEB
Project Ver : C7367_TG_R12_Benga_324_QHD_NOGPS_B1_V01.01.B04
Model Ext   : R9 PLUS

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ... 

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731C_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_Trunk_W17.27.4_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_540x960.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : sysinfo.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 1927 MiB
Saved to : L:\New folder (4)\New folder\MT6580__WALTON__Primo_G8__Primo_G8__7.0__alps-mp-n0.mp2-V1_vz6580.weg.i.n_P116\SP7731CEB_sp7731c_c7367_qhd_6.0_C7367_TG_R12_Benga_324_QHD_NOGPS_B1_V01.01.B04_R9_PLUS\

Done!

DEAD PHONE,HANG LOGO,LCD BLANK,CAMERA FIX,MONKEY VIRUS CLEAN DONE FLASH FILE 

Created by Infinity-Box (c) Chinese Miracle II (c) 2017

Device Brand   : TG

Device Model   : sp7731c_c7367_qhd

Device CPU     : sp7731ceb pass

Device IntName : sp7731c_c7367_qhd_oversea

Device Version : 6.0

Device Compile : 10/27/2017 12:17:55 PM

Device Project : C7367_TG_R12_Benga_324_QHD_NOGPS_B1_V01.01.B04

Device ExtInfo : R9 PLUS

Read more

MYCELL ALIEN_SX8 flash file dead boot repair 100% tested

DEAD PHONE,HANG LOGO,LCD BLANK,CAMERA FIX,MONKEY VIRUS CLEAN DONE FLASH FILE 

MT6580__MYCELL__ALIEN_SX8__w836_ ... 8__5.1__MYCELL_ALIEN_SX8_V003

DEAD PHONE,HANG LOGO,LCD BLANK,CAMERA FIX,MONKEY VIRUS CLEAN DONE FLASH FILE 

Created by Infinity-Box (c) Chinese Miracle II (c) 2016
Device Brand   : MYCELL
Device Model   : w836_648_ax_kcd_sx8
Device CPU     : MT6580
Device IntName : full_w836_648_ax_kcd_sx8
Device Version : 5.1
Device Compile : 2/18/2016 3:55:10 AM
Device Project : MYCELL_ALIEN_SX8_V003
Device ExtInfo : ALIEN_SX8

 Wait for phone...

Phone found! [ 9 ]

Sync...

Inital Boot Ok!

BB_CPU_PID : 6580

BB_CPU_NME : [MediaTek] MT6580_S00

BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000

Processing BROM stage

Settings for BROM configured!

SecCfgVal : 0x00000000

BromVer   : 0x00FF

BLVersion : 0x0001

PreLoader : Active [ Boot with PL ]

BootLdrSS : NORMAL with PRELOADER

Processing DA stage

DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00

Sending and initialize DA ...

Running DA ver.4.2 on BBID : 0x9C

NAND Flash : NOT INSTALLED

eMMC Flash : 700100563130303038501E8F452A92C3

Initialize Memory ... 

DRAM already initialized by Preloader

DAgent sent , init HW now

eMMC FlashIC initialized

[eMMC] : FLASH_VEN : 0x70 , OEM : 0100

[eMMC] : FLASH_INF : [KINGSTON] , 80001

[eMMC] : FLASH_CID : 700100563130303038501E8F452A92C3

[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000

[eMMC] : FLASH_LEN : 0x00000001C3000000

[eMMC] : FLASH_UCP : 7216 MiB [eMMC 8 GiB]

DEV RID    : 0x2932D5D8E7CB9CBC415E8E39C34EBF45

INT RAM    : 0x00020000

EXT RAM    : 0x40000000 [1 GiB]

BOOT TYPE  : EMMC_FLASH_BOOT

SOC VERIFY : C1

Boot Ok!

Reading Flash Content now ... 

xGPT : Normalize settings Ok!

Brand     : MYCELL

ProdName  : full_w836_648_ax_kcd_sx8

ProdModel : ALIEN_SX8

Device    : w836_648_ax_kcd_sx8

AndroidVer: 5.1

MTKxCPU   : MT6580

MTKxPRJ   : MYCELL_ALIEN_SX8_V003

[Read Ok] : preloader_w836_648_ax_kcd_sx8.bin

[Read Ok] : lk.bin

[Read Ok] : boot.img

[Read Ok] : recovery.img

[Read Ok] : logo.bin

[Read Ok] : secro.img

[Read Ok] : system.img

[Read Ok] : cache.img

[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / w836_648_ax_kcd_sx8 / EMMC

Android Info saved

MAUI Meta DB saved

HWConfig Info saved

FW Size : 1671 MiB

Scatter saved to : L:\New folder (3)\MT6580__MYCELL__ALIEN_SX8__w836_648_ax_kcd_sx8__5.1__MYCELL_ALIEN_SX8_V003\

All done!

PRICE

How To Flash

1.  Step Download And Extract The Stock Or Firmware On Your  Computer.
2.  Step After Extracting You Will Find The SP Flash Tool, Driver And Instruction Manual.
3.  Step Install the USB Drivers Skip If Drivers Are Already Installed.
4.  Step Open The SP Flash Tool And load The Scatter File From The Firmware Folder
5.  Step Connect Your Smartphone To The Computer Using The USB Driver.
6.  Step Click on Upgrade / Download Button In The SP Flash Tool To Begin The Flashing.
7.  Step Green Ring Will Appear At The End Of Successful Flash Done.

 Important Notes:

Take A Backup Of Your Personal Data Before Flashing Or Installing The Firmware On Your Smartphone. As This Helps You To Recovery The Personal Data Whenever Any Thing Wrong Happens.

Read more