TECNO-CX-Air-MT6737M Flash File Dead Boot Repair 100% Tested No Dead Risk

MT6737M__TECNO__TECNO_CX_Air__TECNO-CX-Air__7.0__CXAir-H3713B-N-170920V102

Created by Infinity-Box (c) Chinese Miracle II (c) 2016
Device Brand   : TECNO
Device Model   : TECNO-CX-Air
Device CPU     : MT6737M
Device IntName : H3713
Device Version : 7.0
Device Compile : 9/20/2017 4:05:09 PM
Device Project : CXAir-H3713B-N-170920V102
Device ExtInfo : TECNO CX Air

DEAD PHONE,HANG LOGO,LCD BLANK,CAMERA FIX,MONKEY VIRUS CLEAN DONE FLASH FILE

B-KASH-01871366812

Wait for phone...
Phone found! [ 9 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6735
BB_CPU_NME : [MediaTek] MT6735_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x93
NAND Flash : NOT INSTALLED
eMMC Flash : 510001154D3336459EF00342DB2185A8
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM36E
[eMMC] : FLASH_CID : 150100514536334D4203F09EA88584DB
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003A3E00000
[eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB]
DEV RID    : 0x2932D5D895085A652640A0CDB522E4F3
INT RAM    : 0x00020000
EXT RAM    : 0x80000000 [2 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ... 

xGPT : Normalize settings Ok!

Brand     : TECNO
ProdName  : H3713
ProdModel : TECNO CX Air
Device    : TECNO-CX-Air
AndroidVer: 7.0
MTKxCPU   : MT6737M
MTKxPRJ   : CXAir-H3713B-N-170920V102

[Read Ok] : preloader_rlk6737m_65_n.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : tz1.img
[Read Ok] : tz2.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6735M / V1.1.2 / rlk6737m_65_n / EMMC
Android Info saved
HWConfig Info saved
FW Size : 3343 MiB
Scatter saved to : L:\New folder (4)\MT6737M__TECNO__TECNO_CX_Air__TECNO-CX-Air__7.0__CXAir-H3713B-N-170920V102\

All done!

How To Flash

1.  Step Download And Extract The Stock Or Firmware On Your  Computer.
2.  Step After Extracting You Will Find The SP Flash Tool, Driver And Instruction Manual.
3.  Step Install the USB Drivers Skip If Drivers Are Already Installed.
4.  Step Open The SP Flash Tool And load The Scatter File From The Firmware Folder
5.  Step Connect Your Smartphone To The Computer Using The USB Driver.
6.  Step Click on Upgrade / Download Button In The SP Flash Tool To Begin The Flashing.
7.  Step Green Ring Will Appear At The End Of Successful Flash Done.

 Important Notes:

Take A Backup Of Your Personal Data Before Flashing Or Installing The Firmware On Your Smartphone. As This Helps You To Recovery The Personal Data Whenever Any Thing Wrong Happens.